Re: Panasonic TX32DKI


"News.individual.net" <mick.w.moran@xxxxxxxxxxxxxx> wrote in message
news:6r1e3hFep8v6U1@xxxxxxxxxxxxxxxxxxxxx
After the tv has been on for a while the picture becomes brighter until I
can see flyback lines and it will shut down,
sometimes when I switch it on it will become slightly brighter and stay
that way until I switch it on the next time.
HELP would be appreciated thanks in advance Mick.



Bad screen adjustment pot on the flyback or a problem with the 200 volt line
dropping. Possibly adjusting the screen control on the flyback back and
forth a bit may fix it.

Mark Z.


.

Relevant Pages

  • Im a cheapskate!
    ... hit the OFF switch. ... electrolytic cap next to the flyback that the heatshrink had shrunk and ... discolored,but it didn't look burnt.Then I thought,maybe the flyback itself ... out,and it was applied in 2 places,didn't look like a TV repairman job. ...
    (sci.electronics.repair)
  • CCT. Protection switch
    ... rectifier and the bulk input cap of a flyback converter. ... This gives a 750uS rise-time to 13V gate to source of the FET. ... for the FET this gets its power when the switch is flipped to LOAD #2 ...
    (sci.electronics.basics)
  • Panasonic TX32DKI
    ... After the tv has been on for a while the picture becomes brighter until I ... can see flyback lines and it will shut down, ... way until I switch it on the next time. ... HELP would be appreciated thanks in advance Mick. ...
    (sci.electronics.repair)