Alto L12 mixer, only 2007

And the master slider pot has failed (Chinese so assume unavailable).
Long but tiny cross section stereo 2x 10K log pot. Found a larger one that
there maybe enough space and can be screwed onto/under/through the top panel
and wired into the pcb but it is 2x 250K lin of course.
10K and 1K resitors in parallel with each pot, will that be a work around or
will the characteristic be too "lumpy" on the low end?


--
Diverse Devices, Southampton, England
electronic hints and repair briefs , schematics/manuals list on
http://home.graffiti.net/diverse:graffiti.net/


.

Relevant Pages
Loading