Re: JVC model RC-X3 CD portable system


"Ron" <ron@xxxxxxxxxxxxxxxxxxx> wrote in message
news:DqidncoUX9sIf7nXnZ2dnUVZ8lVi4p2d@xxxxxxxxx
Circuit wrote:
Try spinning it by hand, and put a drop of oil on the shaft with a needle
oiler so that it drips down the shaft into the housing.


Use a fine oil like wd40 or LPS.

Uh ho



Maybe my question was ambiguous, the spindle is free to turn but doesn't.

Does anyone know if the likely cause is something simple like a sensor
switch or motor PCB fault, or is it likely to be something more involved
like a laser fault shutdown mode?


.

Quantcast