Re: Controling relays via the USB port

From: Julie (julie_at_nospam.com)
Date: 06/28/04 

Date: Sun, 27 Jun 2004 23:09:18 -0700

Matthew Elliott wrote:
>
> im looking to make a little project but i cannot find any information.
> i know there is parallel relay control interfaces, but there a thing
> of the past these days.
>
> does anyone know any links of USB control of relays
>
> i want to make a bank of relays that i can control via software
>
> i know you can buy them, but i want to make one
>
> any help much appreciated

X-10?

Relevant Pages

  • [PIC] New electronic projects site (Schematics only at the moment)
    ... currently only the schematics are posted but I will ... (iButton Door Lock) Preview, ... option in schematic to control AC, Fan & Heat) can be expanded to 6 ... relays using my Ladybug Automation Controller, ...
    (comp.arch.embedded)
  • Re: What can I replace this latching relay system with?
    ... I think you will have problems finding dimmers to use the existing control ... The relays swich this ... Centralite, LiteTouch, Vantage) mount their dimmers and switches near the ...
    (comp.home.automation)
  • Re: Freezing requirements in embedded product development
    ... begin a component performance selection table. ... This board uses 6 RF relays to select filters. ... suggested that we did not need an MCU to control the relays since the ... MCU can't directly drive the coils and the relay driver chips can be ...
    (comp.arch.embedded)
  • A BIG RED LIGHTBULB!
    ... a device that could control a lamp or two in response to MIDI Machine ... MIDI inputs are merged and real time messages are filtered ... specify device IDs and commands. ... each of the two relays. ...
    (rec.audio.pro)
  • Re: New circuit design for home project
    ... I'd like to find somebody that could design the schematic for this. ... > One device will control the other device, with the interface between them. ... > But this device uses relays in its output. ...
    (sci.electronics.basics)
Quantcast