PC sound to PC speaker / Stereo
From: swede (swede_x_at_hotmail.com)
Date: 01/12/05
- Next message: Scott Carter: "Re: anybody make variable duty cycle Hall Effect switches?"
- Previous message: Robert Baer: "Re: anybody make variable duty cycle Hall Effect switches?"
- Messages sorted by: [ date ] [ thread ]
Date: Wed, 12 Jan 2005 05:30:17 GMT
I recently wired a toggle switch (DPDT - 5 amp - 125VAC, 3 POS) up to a
few input plugs so that I use a patch cable from radio shack to connect
my sound card (speaker out) to the plug connected to the center set of
connectors on the switch, and I plug the PC speakers in one connector and
another cable to the home stereo (plugged into the Phono inputs on a JVC
tuner).
It looks good, but I get a bad humming sound when I try to play it
through my home stereo. I have that computers video output to the TV and
would like to have the sound come from the stereo there instead of from
my PC speakers. The sound from the PC speakers is still good.
Now, I can figure out most connections, but I don't know about the
voltage that different type of wire can handle. I figured that since it
was not using a lot of power, I could get by with using a spare piece of
CAT5e soldered to the plugs and the toggle switch. Ok, I was lazy and
the color coding made it simple. I used a couple small pieces to connect
the ground directly without the switch.
Previously when I would plug the stereo into the audio out on that sound
card it would work fine, but reaching behind the computer and finding the
right cable and the right hole is a pain.
ANy suggestions or help will be greatly appreciated.
swede
- Next message: Scott Carter: "Re: anybody make variable duty cycle Hall Effect switches?"
- Previous message: Robert Baer: "Re: anybody make variable duty cycle Hall Effect switches?"
- Messages sorted by: [ date ] [ thread ]
Relevant Pages
|
