re:Weird guitar...

From: beast (beast_at_serbiancafe-dot-com.no-spam.invalid)
Date: 02/18/05

  • Next message: beast: "re:Is there an easy way yo measure frequencies?" 
    Date: 18 Feb 2005 07:34:49 -0600

    I tried it last weekend, and it turned out very nice. The sound is
    just incredible, very rich and very full. When I added a back truss
    to the neck it changed the capacitance of the circuit and affected
    the tone, that's what prompted me to complete the string coil by
    connecting the back piece which is made of steel strip 2x16" bent at
    the end to hold the strings, connected to the neck truss via a screw
    through the strip, next I connected the neck truss to the strings
    with a copper wire, to complete the loop. I added the magnet at the
    base of the neck, above the pick-up.
     
     Then I took it to the club and played with it, to hear the
    difference.
     It sounds very good....
     
      8)

     Posted Via Usenet.com Premium Usenet Newsgroup Services
    ----------------------------------------------------------
        ** SPEED ** RETENTION ** COMPLETION ** ANONYMITY **
    ----------------------------------------------------------
                    http://www.usenet.com

  • Next message: beast: "re:Is there an easy way yo measure frequencies?"

    Relevant Pages

    • Re: best way to change string gauge to thicker?
      ... > should I adjust the truss and the bridge first and then throw em on, ... >>>strings off and tighten the truss rod before i put the new ones on? ... This is because the new strings will almost ... >> certainly be too thick for the current size of the nut slots. ...
      (alt.guitar)
    • Re: best way to change string gauge to thicker?
      ... But should I adjust the truss and the bridge first and then throw em on, ... Should I strip the old strings off and tighten the truss rod before i put the new ones on? ... This is because the new strings will almost certainly be too thick for the current size of the nut slots. ...
      (alt.guitar)
    • Re: How can a new process use a used port?
      ... I also did truss on the new process when a client was ... connecting to it. ... Its file descriptor 16 appeared all of a sudden: ...
      (comp.unix.solaris)
    • Core dumping for sshd
      ... I ran a strings and truss on the dump and file to see where it ... Prev by Date: ...
      (comp.security.ssh)
    • Sshd core dumping
      ... I ran a strings and truss on the dump and file to see where it ... Prev by Date: ...
      (comp.unix.solaris)