Ok I have got the harder parts of this all figured out but am having
unexpected problums.
What I am doing is replaceing the stock blinkers from my scooter with
LED's. The stock flasher is crap and would not work because of the
limited current drawn from the LED's. I have got a 555 circut that
works great at flashing them. But here is where my problum lies. The
existing flasher has 1 hot lead to it, it is hot all the time. and
when I throw the existing switch the leads coming from the switch are
both hot. I don't have my multimeter here but on my test light the
nonselected side will be dimmer than the side that is selleceted.
Therefore I know it is getting voltage even though it should be off.
This is bad because i only want one side to flash at a time since it
is for the blinkers on the scooter.
Can someone give me an idea of a switch that would work to fix this. I
am thinking I can put in a relay to trigger the flasher but would I
have to have 2 switches? one to energize the relay and one to switch
left or right?
Or would I be able to do both turn on the flasher an select the side I
wantwith one switch?
I am horrible at switchs. I hope this was clear enough for some help,
I thank you in advance.
Re: Turning Signal "Clicking" Wont Go Off ... usually goes from the flasher right to the signal light switch.... I would be working that emergency flasher switch a few more times to see ... > Yes the one I replaced was the one making the noise.... > remove the relay and the noise went away (of course, the turn signals... (rec.autos.tech)
Re: 1971 VW Bus Turn Signal/Flasher ...backing lights.... I took apart my turn signal switch and it appears to be okay. ... I do notice that I have a long Emergency Flasher... simplified wiring diagram showing 4-Way Hazard... (rec.autos.makers.vw.aircooled)
Leds ...unexpected problums.... What I am doing is replaceing the stock blinkers from my scooter with ... existing flasher has 1 hot lead to it, it is hot all the time. ... when I throw the existing switch the leads coming from the switch are ... (sci.electronics)
Re: Electric buggy/scooter/W.H.Y.? ... > troubleinstore wrote: ... >> I haven't heard of the above company, but this scooter is ... Get intouch with the company that sold the scooter to her. ... controller unit and telling the controller to switch off the bleep. ... (uk.people.disability)
Re: power scooter controller board ... Powering the scooter up works with an ordinary on/off keyswitch,... but the scooter only powers up when the the switch is turned on and then off ... To switch the scooter off one has ... (sci.electronics.repair)
