Re: mini/microturbines in the railway?

So thats 110,000 ft lbs of torque. And a cool 1.8 megawatts

.

Relevant Pages

  • Re: Whats the best way to remove a junkyard crankshaft bolt?
    ... >> Those things have like 150 ft lbs of torque on them; ... >> the hillbilly method of putting a breaker bar on the bolt, ... Prev by Date: ...
    (rec.autos.tech)
  • Re: WHAT A BOLT IS, AND HOW IT WORKS
    ... I just measured the torque ... Each one required about 90 lbs to crack free. ... There is no harm done to a torque wrench used in such a manner. ... the tire guy used a torque wrench to tighten the lug nuts. ...
    (rec.autos.makers.honda)
  • Re: WHAT A BOLT IS, AND HOW IT WORKS
    ... I just measured the torque ... Each one required about 90 lbs to crack free. ... > There is no harm done to a torque wrench used in such a manner. ... at higher axial loads than lower axial loads. ...
    (rec.autos.makers.honda)
  • Re: Shear strength of 3/4" square steel?
    ... I've been using a torque multiplier but for some of the bolts there's ... My big torque wrench has lost the 3/4" square shaft which connects it ... If I square up a piece of mild steel bar, will it take the 500 lb-ft ... 3/8" 100 ft lbs ...
    (uk.rec.models.engineering)
  • Re: Anybody else owned a Suzuki GS750?
    ... different power curve than what you were expecting. ... The GS750 only had about 38 ft lbs of torque, ... two stage camshaft" which produced low speed torque for putting around ...
    (rec.motorcycles)