Re: Connecting GARMIN GPS USB Device and using JAVA

From: weckmann (weckmann_at_bluewin.ch)
Date: 03/26/05 

Date: 26 Mar 2005 00:04:26 -0800

We were using Franson GPSGate to get the data out of the GPS 18 USB but
it only gave us the NMEA data. We need the raw data like pseudo range
and phase information...

Garmin provides a very simple SDK to access the USB interface but its
written in quiet complicated C - Code and we werent able to change the
code so that we could get the PVT data from the device...

Garmin officially doesnt provide any support for the SDK... so our
question is, has anybody any sample code to receive data via C-Code (or
even better: Java-Code... though I dont believe that this is possible
with reasonable effort) ?

We would greatly appreciate any help on this matter.

Best regards

Bertram Weckmann

Relevant Pages

  • Re: Adding SDK
    ... I use the USB downloader for fusing the OS ... include a program or DLL that is built separately. ... The ability to download files from the Internet? ... Once you have done a full Sysgen of the OS, use the SDK tools in Platform ...
    (microsoft.public.windowsce.platbuilder)
  • Re: Adding SDK
    ... If you want to build this application from Platform Builder, ... You should see your new SDK platform ... I've built SDK and I've run the .msi file. ... every device that has the USB drivers. ...
    (microsoft.public.windowsce.platbuilder)
  • Re: write file fails with error number 5 = Access is denied
    ... I have debug my code and check that the result of your code and my code are the same, and they both will open the d:\ drive of the USB, I am reading the MBR and the FAT of the USB, i also compare the data i copy with WINHEX to check that i am copy the right Path. ... so the read is OK and the PATH of the write is OK, I believe the problem is with "restrictions, imposed by Windows XP and Windows Vista operating systems. ... "zack" wrote in message ... -i have successed to read from the usb all the raw data in the same way. ...
    (microsoft.public.vc.mfc)
  • Re: write file fails with error number 5 = Access is denied
    ... but are you sure you are opening the correct device and that you have permission to access it? ... -i have successed to read from the usb all the raw data in the same way. ...
    (microsoft.public.vc.mfc)
  • writefile(..) ERROR number =5 = Access is Denied, when writing to USB sector 0
    ... I have tried to run the *.exe file with "run as administrator" option and it doesn't help. ... Also tried to enable the checkbox "run this program as administrator" ... -I have successed to read from the usb all the raw data in the same way. ...
    (microsoft.public.win32.programmer.kernel)
Quantcast