Re: $GPRMC code received
- From: "MacArthur" <MacArthuris@xxxxxxxxxx>
- Date: Wed, 27 Feb 2008 22:55:28 -0400
"Cathy" <Cathy@xxxxxxxxxx> wrote in message news:13sbr793kuukt01@xxxxxxxxxxxxxxxxxxxxx
The GPS is receiving a signal as it displays the position on the GPS screen.
Also this GPS does not send any data if there is no signal (not even in emulation mode)
If I bring the GPS indoors and loose a signal, the GPS beeps and as soon as this happens the input stops showing on the terminal screen
As I mentioned before, I did manage to receive the correct data at one point, whilst playing with settings, but for some reason it has stopped again
C
Really?
--
Live strong and have a nice day, - "Nil carborundum illegitimi"!
Mac H E L P the planet - Don't I D L E ! ! !
Over 1600 Links at Http://MacArthur.Funknstyle.Com
Pictures at http://www.flickr.com/photos/macarthur
and http://www.flickr.com/photos/macarthur-ii/
.
- References:
- $GPRMC code received
- From: Cathy
- Re: $GPRMC code received
- From: MacArthur
- Re: $GPRMC code received
- From: Cathy
- $GPRMC code received
- Prev by Date: Re: PRN32
- Next by Date: Re: $GPRMC code received
- Previous by thread: Re: $GPRMC code received
- Next by thread: Re: $GPRMC code received
- Index(es):
Relevant Pages
|
|