Re: Need Good Quality Upper Plate in Baltimore

From: Mike (wxyz09_at_yahoo.com)
Date: 06/28/04 

Date: Mon, 28 Jun 2004 23:21:19 GMT

He's fixing the broken teeth with Crazy Glue, but it builds up.
I'll pass on your message.

Mike

"Joel M. Eichen, D.D.S." <joeleichen@yahoo.com> wrote in message
news:6usvd099p82du7tsevrnf2h6ggil4nfv92@4ax.com...
> Lucitone 199 denture material will solve most problems. I cannot
> understand why anyone would use anything else!
>
> As for teeth breaking, here is the ticket. The broken tooth must be
> repositioned in the breakout socket and a small round bur and/or
> inverted cone bur (drill) is used to create a diatoric box. OK you
> ask, what is that?
>
> Its an undercut box that anchors into the tooth and anchors into the
> plastic of the denture. The old porcelain teeth used to come with them
> already there. They mechanically held the tooth in place as acrylic or
> (shudder) Vulcanite would not chemically bond to porcelain.
>
> Acrylic bonds to acrylic teeth ... well kinda. Try the diatoric box if
> you are the repair guy and see if it helps.
>
> (This information may prove to be unpopular ~ dentists prefer to make
> a new set ~ claiming the bite is off!)
>
>
> JOEL
>
>
>
>
>
>
>
>
> On Mon, 28 Jun 2004 02:13:30 GMT, "Mike" <wxyz09@yahoo.com> wrote:
>
> >A buddy c/o breaking front teeth in his upper plate.
> >Last time I visited my dentist I asked him what he thought the problem
might
> >be.
> >he responded that "his bite is probably off." He recommended my buddy
see a
> >prosthodontist
> >but he didn't recommend one. Any suggestions for a good prosthodontist
who
> >could make
> >my buddy a plate in the Baltimore, MD area?
> >
> >(buddy not an internet user, so I'm posting this message)
> >
> >Thanks,
> >
> >Mike
> >
>

Relevant Pages

  • Re: Need Good Quality Upper Plate in Baltimore
    ... As for teeth breaking, here is the ticket. ... Its an undercut box that anchors into the tooth and anchors into the ... (This information may prove to be unpopular ~ dentists prefer to make ... >my buddy a plate in the Baltimore, ...
    (sci.med.dentistry)
  • Re: Recovery via Unrecovery
    ... I'm having oral surgery tomorrow to extract some broken teeth (and a few ... "bash awk grep perl sed df du, du-du du-du, ...
    (alt.sysadmin.recovery)
  • Re: Who would use a 60 tooth chainring?
    ... I've seen a photo of a small fixed cog with broken teeth, ... the free chain run begins. ...
    (rec.bicycles.tech)
  • Re: Looking for clock parts
    ... has 80 teeth. ... You can see the two broken teeth in the picture. ... What equipment DO you have. ...
    (rec.crafts.metalworking)
  • Re: Looking for clock parts
    ... It measures 53 mm in diameter (including the teeth), is 23 mm deep and has 80 teeth. ... You can see the two broken teeth in the picture. ... If not, I had wondered about some way of grafting new teeth onto the drum, but I don't have enough equipment to do that at the moment. ... I have the broken teeth and had wondered if there was a suitable means for re-attaching them, but right now I can't think of anything. ...
    (rec.crafts.metalworking)