Re: 75 um protective cover glass on film

moonlightbamb@xxxxxxxxxxx wrote:
I'm trying to cover a photographic film target with a 75 micron
protective cover, either glass, fused silica or whatever.

I';ve been able to find 150 um cover slips, which we epoxy on top, but
not 75.

Does anyone know of any technique or company to make 75 micron glass
thick ( 50 mm x 50 mm) covers or protective coatings that would do the
same.?

For one-off, you could grind down a 150um thick cover slip.
.

Relevant Pages

  • Re: Whats the best stuff to use sealing backglasses?
    ... or can attack the ink. ... Thick Crystal Clear Glaze or Rust-Oleum Crystal Clear Enamel. ... Especially if your glass has heavy flaking to ... It's imperative that the first few coats be put on VERY ...
    (rec.games.pinball)
  • Re: using sandpaper on a glass sheet to sharpen chisels
    ... We had good luck many years ago getting a sample grave marker from a monument company. ... but only an inch or two thick. ... My question is about the 1/2" thick sheet of glass, ...
    (rec.woodworking)
  • Re: Computer Monitors.
    ... The front of a CRT is a good 20mm or more thick. ... is the heaviest and thickest part of its glass envelope. ... That is why they are so bloody heavy. ...
    (sci.med.vision)
  • Re: How Flat Glass?
    ... flatness and very thick, works like a charm here for scary sharp, ... >7 plane actually rocks on the glass. ... >I previously had a 1/4" thick piece that didn't vary by more ... >What is a normal tolerance? ...
    (rec.woodworking)
  • Re: How Flat Glass?
    ... >> have determined the thick end and consistently placed that end on the ... >> bottom. ... >> proof of glass flow and others argue it is thick because the worker ... > It doesn't claim that glass is always laid that way. ...
    (rec.woodworking)