Re: How to strip a 9 micrometer singlemode fiber?
- From: Phil Hobbs <pcdhSpamMeSenseless@xxxxxxxxxxxxxxxxxx>
- Date: Fri, 20 Oct 2006 10:33:47 -0400
JK wrote:
On 19 Oct 2006 08:26:21 -0700, "Dendrites" <Maqiulin@xxxxxxxxx> wrote:
Hi Guys,
I have bare singlemode fiber with a core diameter of 9 micrometer and a
cladding of 125 micrometers. I want to strip out or remove the cladding
to get the core exposed. I have tried strippers, but I can only get it
stripped into a diameter much larger than 9 micrometers.
Does anybody know how to complete this strpping job? Thanks a lot!
It is not necessary to strip the single-mode core and not advicable,
since you will get a fiber tip that can vibrate.
It depends on what the OP is trying to do. I'm assuming he's trying to do something with the fields on the sides of the core--lots of people do those sorts of measurements.
To the OP: What exactly are you trying to do with this bare fibre core?
Cheers,
Phil Hobbs
.
- Follow-Ups:
- Re: How to strip a 9 micrometer singlemode fiber?
- From: Dendrites
- Re: How to strip a 9 micrometer singlemode fiber?
- References:
- How to strip a 9 micrometer singlemode fiber?
- From: Dendrites
- Re: How to strip a 9 micrometer singlemode fiber?
- From: JK
- How to strip a 9 micrometer singlemode fiber?
- Prev by Date: Re: How to strip a 9 micrometer singlemode fiber?
- Next by Date: Re: How to strip a 9 micrometer singlemode fiber?
- Previous by thread: Re: How to strip a 9 micrometer singlemode fiber?
- Next by thread: Re: How to strip a 9 micrometer singlemode fiber?
- Index(es):
Relevant Pages
|
Loading
