Re: Mental MRI torpedo tube distractional visualizations.

Well,, I'll request a 125 pound, 5' 7" 19 year old female. I was not
so gifted that even she could produce results which would keep me from
fitting into the tube but as us white guys say, it's not the size but
how you use it. :-)

You are almost as funny as I would like to be. Thanks for the
thoughts.

Jim
James E. Klein
jameseklein@xxxxxxxxxxxxx

Engineering Calculations
http://www.ecalculations.com
ecalculations@xxxxxxxxxxxxxxxxx
Engineering Calculations is the home of
the KDP-2 Optical Design Program
for Windows.
1-818-507-5706 (Voice and Fax)
1-818-823-4121
.

Relevant Pages

  • Re: Repairing wall mounted gas heater.
    ... Somebody mentioned using Teflon tape on the threads of the fitting, ... >> After reassembling the heater and lighting the pilot light, ... >> the nut when attached properly,around the top of the aluminum tube is ...
    (rec.crafts.metalworking)
  • Re: Home made cooler mash tun: drilling the hole
    ... Looks like fitting a spigot of some sort could be the way ... I need to fit a clear plastic tube, 1/2 inch ID, 3/8 inch OD. ... rubber stopper and drilling through the rubber stopper to fit the tube. ...
    (rec.crafts.brewing)
  • Re: 72 yamaha dt2 250 with frozen swingarm... i think
    ... I had thought that if I ever had to take the long-lost Ducati swingarm ... fitting on the end to keep it lubed. ... Putting a zerk fitting on the swingarm tube would have required welding a ... boss to the tube as the tube is too thin to tap for a 1/4" NPT fitting, ...
    (rec.motorcycles.dirt)
  • Re: Armadillo leads to split valve mystery
    ... the tube might not be fitting squarely. ... It could be your tyre fitting procedure at fault: ... Do you push the valve into the tyre, seat the beads around the valve and ...
    (uk.rec.cycling)
  • Re: Tourer tires
    ... fitting the tube, and it was cut by the tyre bead ... * the tube was stressed because the valve wasn't lined up with the ... either at fitting or because it crept around the rim due to ... A smaller connector is being sourced. ...
    (uk.rec.cycling)