Subassembly Kinematic mounting
- From: Tom Hubin <thubin@xxxxxxxxxxxxx>
- Date: Mon, 18 Jun 2007 23:47:52 GMT
Hello,
I need to have a removable subassembly with good repeatability when
reinserted. Actual position is not an issue since optics are adjusted
with the subassembly in place.
I can use Thorlabs six piece set if necessary but I prefer something
that is more predictable.
Machining what I need is an option but I would prefer to work with
common breadboard with 1/4-20 holes on one inch centers.
So, I am looking for
1) magnets that screw into 1/4-20 holes,
2) ball-end screws that screw into 1/4-20 holes,
3) and mating slots or parallel rods that can be attached with 1/4-20
screws.
Second choice would be these same items but press fit or a different
thread.
Last choice is machining more and buying less. Not a happy choice for a
one-of-a-kind.
Tom Hubin
thubin@xxxxxxxxxxxxx
.
- Follow-Ups:
- Re: Subassembly Kinematic mounting
- From: danek
- Re: Subassembly Kinematic mounting
- From: Richard J Kinch
- Re: Subassembly Kinematic mounting
- Prev by Date: Re: Solvent vapors that attack AR coatings?
- Next by Date: Re: Solvent vapors that attack AR coatings?
- Previous by thread: Solvent vapors that attack AR coatings?
- Next by thread: Re: Subassembly Kinematic mounting
- Index(es):
Relevant Pages
|
