Cementing Immersion Lene to Detector

From: "shay ghilai" <sgoptics@xxxxxxxxxxxxxxxx>
Date: Fri, 7 Sep 2007 12:20:53 +0200

Hi there

We'ld like to cement an epoxy coated Si detector, flat, to Polycarboinate
immersion lens.

What adhesive is recommended ? our main concern is not strength, but
shrinkage that might harm the detector, and even worse - Conteminations that
might diffuse into the detector junction.

Can anybody help ? ? ?

TIA

--
Shay Ghilai

t: ++972-3-6473647
f: ++972-3-6473508
c: ++972-523-594907

sgoptics@xxxxxxxxxxxxxxxx
Box 10033, Zahala, Tel-Aviv,
Israel 61100

.

Follow-Ups:
- Re: Cementing Immersion Lene to Detector
  - From: Brian
- Re: Cementing Immersion Lene to Detector
  - From: Helpful person

Prev by Date: Re: increasing fresnel lens light concentration?
Next by Date: Re: Cementing Immersion Lene to Detector
Previous by thread: Carl Zeiss - New Onlineshop!
Next by thread: Re: Cementing Immersion Lene to Detector
Index(es):
- Date
- Thread

Relevant Pages

Re: RF Detector? RF Power measurement?
... > I'm trying to design RF signal strength detector as my project. ... try Google on "Field Strength Meter". ...
(sci.electronics.design)
Re: Cementing Immersion Lene to Detector
... We'ld like to cement an epoxy coated Si detector, flat, to Polycarboinate ... immersion lens. ... our main concern is not strength, ... shrinkage that might harm the detector, and even worse - Conteminations that ...
(sci.optics)