Re: Cementing Immersion Lene to Detector

From: Helpful person <rrllff@xxxxxxxxx>
Date: Fri, 07 Sep 2007 04:28:51 -0700

On Sep 7, 6:20 am, "shay ghilai" <sgopt...@xxxxxxxxxxxxxxxx> wrote:

Hi there

We'ld like to cement an epoxy coated Si detector, flat, to Polycarboinate
immersion lens.

What adhesive is recommended ? our main concern is not strength, but
shrinkage that might harm the detector, and even worse - Conteminations that
might diffuse into the detector junction.

Can anybody help ? ? ?

TIA

--
Shay Ghilai

t: ++972-3-6473647
f: ++972-3-6473508
c: ++972-523-594907

sgopt...@xxxxxxxxxxxxxxxx
Box 10033, Zahala, Tel-Aviv,
Israel 61100

What kind of lens? What is the NA at the detector? What resolution
do you require? This information is needed before an answer can be
given.

www.richardfisher.com

.

References:
- Cementing Immersion Lene to Detector
  - From: shay ghilai

Prev by Date: Cementing Immersion Lene to Detector
Next by Date: Re: Cementing Immersion Lene to Detector
Previous by thread: Cementing Immersion Lene to Detector
Next by thread: Re: Cementing Immersion Lene to Detector
Index(es):
- Date
- Thread

Relevant Pages

Cementing Immersion Lene to Detector
... We'ld like to cement an epoxy coated Si detector, flat, to Polycarboinate ... immersion lens. ... our main concern is not strength, ... shrinkage that might harm the detector, and even worse - Conteminations that ...
(sci.optics)
Re: RF Detector? RF Power measurement?
... > I'm trying to design RF signal strength detector as my project. ... try Google on "Field Strength Meter". ...
(sci.electronics.design)