Re: gas in a cylinder.

From: Luis Muzquiz (lmuzquiz_at_udem.net)
Date: 07/10/04

  • Next message: Norman Yarvin: "Re: fission question (Why no China Syndrome with Daghlian and Slotin??)"
    Date: 10 Jul 2004 14:00:53 -0700
    
    

    sounds like this guy may be a terrorist

    pdraper@yahoo.com (Paul Draper) wrote in message news:<74768d2d.0407020937.78e2e87b@posting.google.com>...
    > "Anja" <anja@no.spam.com> wrote in message news:<40e200c0$0$283$edfadb0f@dread12.news.tele.dk>...
    > > Assume I have a gas in a cylinder that has a piston as a top. the system is
    > > isolated. if I put a mass on top of the piston, then the pressure and
    > > temperature inside the cylinder will increase, while the volume will
    > > decrease.
    > > What is the physics behind the fact that the temperature increases and the
    > > volume decreases?
    >
    > Odd place to post this question. The volume decrease is simply due to
    > a force imbalance: there is more force on top of the piston than
    > below. Of course, that doesn't last long, because as the pressure
    > increases inside (Gradually! NOT at the very instant the weight is
    > applied -- perhaps that's your misconception), eventually the two
    > equilibrate again and the piston stops moving. It's actually not a
    > given that the temperature will increase. It might, it might not --
    > depends on the thermal conduction of the cylinder.


  • Next message: Norman Yarvin: "Re: fission question (Why no China Syndrome with Daghlian and Slotin??)"

    Relevant Pages

    • Re: What Press to get?
      ... I bought the cylinder, hose, fluid, gauge, ... fittings, battery and power pack - plus some wood, and sheet metal to ... I compared the gauge (adjusted for the piston size) with a Wolter P2F ... there is a relief valve on the pump to relieve pressure that will ...
      (rec.pyrotechnics)
    • Re: What Press to get?
      ... I bought the cylinder, hose, fluid, gauge, ... fittings, battery and power pack - plus some wood, and sheet metal to ... I compared the gauge (adjusted for the piston size) with a Wolter P2F ... there is a relief valve on the pump to relieve pressure that will ...
      (rec.pyrotechnics)
    • Re: Clueless about two strokes!
      ... Get the cylinder honed with a ball hone and check the piston after you have ... Must be the rings, right? ... re-plated (normally the replater will send you a replacement cylinder ...
      (rec.motorcycles.dirt)
    • Re: Clueless about two strokes!
      ... and four strokes, and repair them myself, but the newer bikes I've never ... Must be the rings, right? ... Cylinder bore looks good. ... Or piston and rings? ...
      (rec.motorcycles.dirt)
    • Re: temperature increases, volume decreases. why?
      ... > Assume I have a gas in a cylinder that has a piston as a top. ... > decrease. ... "Quis custodiet ipsos custodes?" ...
      (sci.physics)

  • Quantcast