New improved facts part 8v034

Vacuum, Duration, Time and Energy.

************* Simplified *****************

The reading of page 7 is recommended before this page. Duration used in the
context of this set of posts means 'between intervals' whether the state its
being applied to has or has not any embedded interval markers.
So that a longer duration would mean the duration between intervals was
longer and as such the interval rate would be slower with respect to some
other faster rate.
The modulation of the LVS causes a duration change in the vacuum state
with it being to possible to consider the states stable at (a1), (b), (a2),
(c) or (a3) fig. 3.
Although (a1), (a2), (a3) are drawn at the same level its just as probable
that these three states could be on a curve or ramp. The most important
thing to understand about the states (b) and (c) are that they are displaced
in the vacuum by (a2) and the transitions (d2), (d3) and due to their
different duration factors with respect to (wrt) LVS Time, with (b) being
in the past and (c) being in the future wrt the LVS Time(a1), (a2), (a3)
if that was flat at that point and (a1) = (a3) and (a2) was part of the
(d2), (d3) transition.

fig 3
Increase in Matter, Energy, Duration and decrease in Potential for
motion (Field), Positive
(b)__
Chosen or (d1)/ \(d2)
Applicable_(a1)___/ \_(a2)_ _(a3)_
Vacuum \ /
State (d3) \ __/(d4)
(c)
Decrease in Matter, Energy, Duration and increase in Potential for
motion (Field), Negative

>From a normal pov LVS Time is what your wrist watch or local method of
keeping time shows and is the agregate durational states of the local vacuum
state including elements of the LVS that may have been elevated to partical
status by duration modulation. On this page we will not be discusing the
origines of the example states, this will be explained on another page so
for the moment the example states are products of external states that are
not examined.
The trend is for the states (b) and (c) to decay into state (a1), (a2), (a3)
the LVS thus providing the energy for cosmic expansion but if it can be
spatially arranged for states (b) and (c) to be brought into coincidence at
a rate greater than the cosmic expansion rate then a force will be observed
repelling the surroundings as the set (a1,a2,a3), (b), (c) have effectively
grown bigger resulting in the set becoming ((a1,a2.a3)+b+c) from the pov
of the surrounding LVS. To achieve this effect (b) and (c) need to be given,
from a source external to this set, a spatial vector that causes them to try
and intersect spatially.
No motion of the vacuum itself is implied by this introduction of a spatial
vector just the modulation effect itself in a similar way that wave energy
is carried by water.
The product of this vector set would be to raise the values of (a1) and (a3)
so the transient state defined by (d2), (a2), (d3) was subsumed in a fusion
effect that produces a duration ripple in the surroundings, this we
interpret as energy in one form or another.







.

Relevant Pages