Re: diamonds

From: tj Frazir (GravityPhysics_at_webtv.net)
Date: 09/16/04 

Date: Thu, 16 Sep 2004 18:04:02 -0400

Are you running a mercury big block ?
 Filling a small chamber inside a frozen block of nickel steel with
mercury ,,plugging it to withstand 50,000,000 psi.
 Heat the block up , the mercury presses carbon into diamond .
 Or clear steel. The clear steel is a supper conductor worth more than
diamonds.
 Imagine a spperconductor light detector that can see the moon from the
sea floor or see the end of the universe in space.
  A new method of photon detection is a solid supperconductor .
 Resistance is the electron changing directions from orbit ,,a slight
miss alinement of orbits.
 Cold is one way but compressed till you can see threw steel is a
mindblower .
  Copper works better than steel just because the atoms are smaller so
the miss aline-ment is less , compresed steel gets rid of all the space
and presses the foam of space out of the steel.
If you can heat the steel ,,and that psi is allot of heat , wile putting
millions of psi on it.
 re-freeze the block to get the presure back off.
take bolts out of plug ,,reheat to blast plug out.
 once its clear steel ,,,its never going to change.
heat no longer afects it and its slick and parts nead no oil and have no
friction.
 The block is 10 feet wide 20 tall and the chamber grew ith each cycle
till the chamber walls are clear . 1 gallon chamber pressed out to 8 .
The chamber walls are like the stuff at the center of massive stars.
  600 million psi and you can see threw many things.
 Are ou playing with a big block ?
   

Relevant Pages

  • Re: Strength of a beam.
    ... The book gives the modulus of elasticity of steel as ... Is that supposed to be the same as the strength of the steel? ... Stress units are PSI. ...
    (rec.crafts.metalworking)
  • Re: Good high speed shaft material?
    ... Yp minimum: 100,000 psi ... Machineability of annealed 4140: 55% or B1112 ... Consequently I stand with my statement above that if a shaft of 1144 ... steel failed then, other things being equal, a shaft of 4140 HT & SR ...
    (rec.crafts.metalworking)
  • Re: Conversion of the MX991U flashlight to 3-watt LED
    ... I assumed piezo is what he was going to use..virtually everybody is ... using piezo these days for barrel work, PSI, etc etc ... than a gram wouldn't be able to track events in the steel to which ... with modulus of elasticity of 30 million PSI, ...
    (rec.crafts.metalworking)
  • Re: Quickie Poll -- C vs. C++
    ... stainless steel sheetmetal screws. ... Stainless steel is less stronger than normal steel. ... 1016 cold drawn average tensile strength azbout 75,000 psi before work ... Typical alloys are similar to hardenable carbon steels but have better ...
    (sci.electronics.design)
  • Re: overpressure experiment
    ... 10 million psi ... the chamber is filled cold, ... liquid mettles and clear steel ...
    (sci.physics)