Re: Desktop Railgun


tj Frazir wrote:
> Yep. The only mker of clear steel super conductors with a 20 year head
> start.
> 5000 ton block .
> re-frezzing it takes the presure back off ,,then thaw the top and thaw
> the plug then re-heat and the mecury pushes the plug out.
> The plug had water in it ad was fzen in a deap narow hole after a press
> pushed it in .
> The plug expanded and locked at -20.
> the bottom got a little heat then the mecury expanded and trys to melt
> the block down .
> So its done so slow the block can absorb the heat as the psi climbs .
> Doing it too quick will result in an atomic blast.
> If the inside mecury is let heat the inside by making too much psi too
> quick then the heat will run away on its own and melt the block down and
> then blow up.
> It takes a few cycles to harden the chamber ..then when the chamber is
> clear steel it can heat quick and contain an atomic blast .
> Once its clear steel its no longer in a thermal state an wount ever
> change .
> The chamber starts at 1 gallon .
> Now it will crush a 50 bl steel bar down to the size of a nail and a
> clearer then diamond nail.
> A nail so hard a grinder cant mae heat on it and it has no machanical
> friction ..a berring would nead no oil and be slicker then slick.
> clear steels best property is superconducivity.
> It wount get hot no what amps .
> its a room temp and any temp sc.
> Its the only thing a electric cannon can be made of .
> from orbit it takes 1 second to blast a nuke befor it gets 100 feet off
> the ground.
> 5 pounds going 25000 miles per sec.
> 6000 rounds pm.
> like ramming a rod of bullets stacked into a pipe when the pipe is the
> barrel.
> 390 tesla per gram pushing and 389 pulling per gram.
> 600 tesla per gram 1.2 million psi .
> 1.2 million psi and no kickback.
> ronnies ray-gun..1000 points of light ended the cold war. 20 million a
> round but 5 lb round
> will nuke a nuke in its tracks from space.
> it toulk a physicsist to start the cold war and toulk one to end the
> cold war.
> They fear tring to make clear steel.
> failing is just a block ripped in 1/2 if they are luckey . If they
> build the block perfect and it dont bust it might melt down and a block
> big enouph with enouph merc in it heating its self
> will melt down and explode as a nuke much worse then a nuke.
> I melted a small one down and it left earth wile the mecury exploded
> when it hit the air.
> it was just a 10 foot block with 3 gal chamber .
> we were 30 miless away when it went up .
> it must have leaked and was around 10 million psi .
> The big block makes diamonds by underfilling the block so it tops out
> safe.
> clear steel take a filled up cold big block .
> the mecury has no place to expand to so it pushes steel out of its way .
> It pushes the sides of the block out.
> It will just push steel like it was wax.
> untill its clear steel. once the chamber is clear it wount push it
> will get real hot and the chamber melt the steal around it.
> maybe 20 cycles to clear the chamber.
> them it will crush steel 1000 to 1 .
> 50 pound nickel clear as glass.
You know, I would be equally impressed, or maybe even more, if you
for example build a little crystal radio that actually received
something.

You can then improve on it step by step, and it is within your budget.
Have to dash now to get parts for connecting my heat-exchanger for the
nuke station.
CU

.

Relevant Pages

  • Re: Desktop Railgun
    ... The only mker of clear steel super conductors with a 20 year head ... So its done so slow the block can absorb the heat as the psi climbs. ... It takes a few cycles to harden the chamber ..then when the chamber is ... will nuke a nuke in its tracks from space. ...
    (sci.physics)
  • Re: Before I buy Leaded Steel
    ... using the _right_ steel might make a significant difference. ... big" steel), get it to the shape I want, and properly heat treat it, it's ... Obama presidency than to restore the necessary common sense ... fools that made him their prince". ...
    (rec.crafts.metalworking)
  • Re: Metal Spinning Tools - What and How To Make?
    ... pointed end on one bar by hammering on it on the back of my vise. ... I figured I needed something better to heat the metal ... you'll need a length of pipe and/or steel bucket (or if you ... sticking to the metal, you're ready to quench. ...
    (rec.crafts.woodturning)
  • Re: pre and post heat treatment for TIG welding
    ... that careful control of pre heat, and interpass temperature, amd post ... of heat control since the higher carbon content could encourage cracking. ... This makes the carbon more influential on the steel than say a 1040 ... The old standard was to post weld heat treat tube joints in 4130 ...
    (rec.crafts.metalworking)
  • Re: Physics of the 9/11 building collapses?
    ... Take a piece of steel and heat it up. ... Steel gets very soft long before it gets red. ... kinetic energy will be lost in demolishing the lower floor, ... slow the rate of collapse of the structure. ...
    (sci.physics)