Re: Octane Ratings for Ethyl/Methyl

I compress ai to 150 psi and inject it into the head , then kick the
flap open and let the tanks presure up in the cyclinder and re-compress
it befor injecting O2 and Gas or iesel or corn oil or candle wax !!
anything..
well Im working on the steamer now.
I ran lpe ballanced gas air for many years.
270 HP 250 MPG .
gas air O2 and steam .
the engine has no coolant .

For 2 years all I did was blast underwater and watch Pmax as far down
as 1000 psi.
I might be the best bubble maker under water.
But I shure as hell biult the planets best engines.
The 4 cyclinder fires one cyclinder per sec wile the rest ae getting
eady or are ready and I can fire as many as I want at once.
I can run the tank at 50 psi up to 1000 psi.
This engine can change its displacement .
it can be a big engine or a very small engine and run on a quart all
night at 5 hp.
I can run liquid metal !!
But I know the planets not ready for liquid metal engines.
LPE does 500 MPG at 48 hp when hot in thermal ballance identical to
the human body.
I can ballance it hot on gas air o2 and steam and o2 in an insulated
engine to keep the heat in and then run carrots or candybars !
I ballanced it on candy a few times .
I run it on amoniumnitrate and diesel o2 and intake air-steam and that
one kicks ass big time.

.

Relevant Pages

  • Re: Got my little runabout today ;-)
    ... > The survey was completed today. ... > ranging from 159 psi to 162 psi. ... Engine in excellent shape. ... > dings that the dealership will repair. ...
    (rec.boats)
  • Re: Where to find an accurate tire pressure gauge???
    ... like 35 PSI just fine and my K1500 likes 50 PSI just fine, except I do lower the rears to 40 PSI when the truck is empty. ... Just a week or so ago, you were arguing with me when I suggested going outside the manufacturer's recommendations on oil viscosity - after all - how could I know more than the engineers who designed it? ... Personally, I don't for the simple reason that an engine is an expensive component to experiment with, whereas tires are relatively cheap. ... I can get fairly good tires for my van for less than $400 a set and even if my experiment increases my wear by 25%, I'm only out a hundred bucks or so. ...
    (rec.autos.makers.chrysler)
  • Re: Damaged SOMETHING with backfiring ...
    ... I finally got my catalytic converter all the way off. ... You have identified that #2 noise as an exhaust manifold/gasket leak. ... put the pedal to the metal and cranked the engine. ... the guage leveled out around 175-180 PSI. ...
    (rec.autos.makers.vw.watercooled)
  • Re: How does the rotors outer circumference change without leakage ?
    ... of te cyclinder work together to time the best stroke. ... O2 mixed with the gas air mix boost the psi x 5. ... But a boat motor is just a water rocket running on gas air and o2. ...
    (sci.physics)
  • Re: engine swap info 300dengine in 300sd
    ... intake manifold that trips at 16 psi to open the electric valve (on left ... Is the 300D replacement engine a turbo? ... And borrowing parts as needed from the 81 300D car. ...
    (alt.auto.mercedes)
Quantcast