3 Layers of Destruction, 2 Layers of Deception on 9/11

3 LAYERS OF DESTRUCTION, 2 LAYERS OF DECEPTION ON 9/11
by
Scalar Interferometry

On 9/11, three methods of destruction were used in a multi-layered
fashion to destroy the Twin Towers of the World Trade Center;

1. Plane Crashes
2. Scalar Interferometry
3. Thermite Shaped Charges

As a consequence, two layers of deception or illusion were created and
used to mislead the public about the real method which was used to
destroy the Twin Towers.

PLANE CRASHES - 1st Destruction Method/ 1st Deception Layer/1st
Official Story
----------------------------------------------------------------------------------------------------
Two planes supposedly "hijacked" by "19 men with boxcutters" were
crashed into the World Trade Center, one plane hitting the North Tower
and one plane hitting the South Tower.

The burning jet fuel from the planes set fires in the areas of the
crashes. In the "Official Story" the Government claims the burning
jet fuel melted the 47 central steel columns in each of the towers of
the World Trade Center and caused the buildings to collapse.

Simple scientific evidence proves the "Official Story" of the Tower's
collapse is impossible since jet fuel burns at about 650 degrees in
open air and steel melts at about 2500 Degrees.

This official story will be referred to as the "First Official Story".


SCALAR INTERFEROMETRY - 2nd Destruction Method
------------------------------------------------------------------
Since burning jet fuel wouldn't be hot enough to melt the 47 Central
steel columns, another way of introducing heat needed to be used.

Scalar Interferometry, which is a process of colliding two longitudinal
waves in the Time Domain, induces scattering electromagnetic(EM)
energy(Heat) in 3-Dimensional space. This process is clearly
explained in Lt. Colonel (Ret.) Tom Bearden's 2002 book "Energy From
the Vacuum" and can be deduced from the quaternion mathematics within
the 1873 edition of James Clerk Maxwell's "Treatise on Electricity And
Magnetism" as well as his original 1865 paper titled "Dynamical Theory
of the Electromagnetic Field" which contains 20 equations with 20
unknowns based on William R. Hamilton's quanternion mathematics.

The quanternion mathematics in Maxwell's 1873 book outlines the
presence of vector and scalar components contained within
electromagnetic energy. In the late 1800's, the scalar component of
Maxwell's equations were removed(or deliberately censored) by
mathematicians Oliver Heaviside and Willard Gibbs and resulted in the
four censored "Maxwell" equations of Vector Analysis on which modern
physics, including Einstein's relativity and quantum mechanics, is
based.

This explains why modern physicists, when confronted with the reality
of Scalar Interferometry, dismiss the possibility out of hand. Their
entire modern scientific paradigm is based on the censored "Maxwell"
equations and strict Vector Analysis which explicitly excludes the
reality of scalar components interacting with vector components from
their mathematical models.

Put simply, the presence of scalar components in EM energy is the key
to understanding Scalar Interferometry. The following is a brief and
simple explanation of the process.

Longitudinal waves in the time domain, which move back and forth on a
single axis called "time", are created when two frequency modulated
3-Space EM waves that are 180 degrees out of phase are combined. The
vector components(3-Dimensional) portions of these waves are canceled
out but the scalar components(longitudinal waves in the time domain)
that move back and forth with the motion of frequency modulation,
create a longitudinal wave that moves back and forth on the time axis.

Two longitudinal waves are each broadcast from two different
transmitter sites on different parts of the Earth and are collided in
the time domain in the area of a target.

The colliding longitudinal waves in the time domain, especially when
they intersect within the same exact area as matter in 3-space, begins
creating a flux of photons in the vacuum photon flux, a region existing
between the time domain and 3-Dimensional space which is continuously
creating and destroying virtual pairs of photons and anti-photons.

An excess flux of photons from the vacuum manifests in our
3-Dimensional space as scattering 3-Space EM energy(Heat) inside of the
matter and heats it up, similar to microwaves heating food in a
microwave oven. The amount of energy in the longitudinal waves which
is transduced into 3-space EM energy during the collision, determines
the induced temperature in the matter and the rate at which the energy
is transduced will either create a gradual heating of the matter if the
energy is transduced slowly or an explosion if the energy is transduced
quickly.

This scalar interferometry process was used to introduce excessive heat
and melt the 47 central steel columns of each tower at two different
times;

1st Time - The Basement Explosions
--------------------------------------------------
The scalar induced EM energy created by the Scalar Interferometry
process was used to weaken the 47 central steel columns in the basement
in preparation for the implosion of Tower 2 at 9:59 AM and the
implosion of Tower 1 at 10:28 AM.

The manifestation of scalar induced EM waves in the basement explains
the molten metal "explosions" and "vibrations" that were reported by
World Trade Center custodian William Rodriguez and exposure to scalar
induced EM waves explains why one of Rodriguez's friends had his skin
blown or "cooked" off at the time of the explosions.

2nd Time - The Implosions of Tower 1 and Tower 2
---------------------------------------------------------------------
Scalar Interferometry was also used to melt the 47 central steel
columns in the vicinity of the plane crashes in order to make it look
like the fires "melted" the columns in the "First Official Story" or
that "shaped charges" knocked out the central columns in the "Second
Official Story"(see below).

The scalar induced melting of the central columns explains the rivers
of molten steel that were pouring out of each of the Twin Towers
minutes before they were imploded.


EVIDENCE FOR SCALAR INTERFEROMETRY
----------------------------------------------------------------

Two interesting side effects manifested at the World Trade Center which
supports the deployment of Scalar Interferometry in the destruction of
the Twin Towers.

Short Term Effects of Scalar Interferometry - Seismic Spikes On Local
Seismographs
----------------------------------------------------------------------------------------------------------
While scalar interferometry was continuously used to heat the 47
central steel columns of each of the towers in the basement up to the
point of total failure, scattering 3-Space EM energy also manifested in
the ground underneath the World Trade Center complex.

The peak scattering of EM energy in the ground, which occurred at the
exact moment the 47 central steel columns failed and just before the
use of the shaped charges on the upper floors(see below), resulted in
"seismic" spikes on local seismographs moments BEFORE each tower was
imploded.

Visual evidence of this phenomena can be seen in the Naudet brothers
documentary "9/11". Just before the South Tower collapses, one of the
Naudet brothers is filming Chief Pfeiffer of Engine 7/Ladder 1 who is
talking on his radio in the lobby of the North Tower. Seconds before
we hear the South Tower collapsing, the lobby of the North Tower begins
shaking as if an "earthquake" had just taken place. This seismic
movement was the result of a peak scattering of scalar induced EM
energy in the ground underneath the World Trade Center complex.

Long Term Effects of Scalar Interferometry - The Molten Pools Of Steel
----------------------------------------------------------------------------------------------
A delayed effect of scalar interferometry, the decay of scalar
potentials in the local active vacuum(a region between 3-Space and the
Time Domain) within the melted steel of the 47 central steel columns in
the basement, explains the presence of molten pools of steel which
were found in the basement months after the fires had been put out.

The gradual decay of scalar potentials in the vacuum(originally created
on 9/11 by the colliding longitudinal waves in the time domain)
continuously induced scattering EM energy in 3-space(Heat) and kept the
molten steel hot for months.


SHAPED CHARGES - 3rd Destruction Method/2nd Deception Layer/2nd
Official Story
----------------------------------------------------------------------------------------
Shaped charges, consisting of C-4 and Thermite were used to mask the
deployment of scalar interferometry inside the WTC on 9/11.

They also served the purpose of a "Second Official Story" in the event
the "First Official Story" of "19 muslims hijacking planes" ever fell
apart.

The use of shaped charges explains the presence of "squibs" or clouds
of gases blowing out incrementally in a downward direction on the
outsides of the towers as each one imploded just like a normal building
demolition.

The Thermite compounds within the explosive charges conveniently masked
the deployment of scalar interferometry by making it look like the
shaped Thermite charges melted the beams.


DESTRUCTION METHODS - ORDER OF USE
--------------------------------------------------------------

Here's the order in which the methods of destruction were used on the
World Trade Center on 9/11;

1. PLANES were crashed into the World Trade Center towers and blamed
on hijackers which became the "First Official Story". The plane
crashes and the resulting jet fuel fires masked the use of shaped
charges and scalar interferometry.

2. SCALAR INTERFEROMETRY was used to melt the central columns of each
of the World Trade Center towers in order to support the First Official
Story's supposition that "fires had melted the columns" and the Second
Official Story's supposition that "shaped charges had destroyed the
columns".

3. SHAPED CHARGES, consisting of C-4 and Thermite, were used to weaken
the outer skin of each of the World Trade Center towers, partially melt
the steel beams and helped implode the buildings. The tops of each
building crushed the lower floors underneath them similar to a
pile-driver effect. The flow of debris down through the center of
each tower continuously pushed outwards and peeled away the outer skin.
The use of shaped charges became the "Second Official Story".


CONCLUSION
--------------------

The World Trade Center was ultimately destroyed by the use of Scalar
Interferometry on the 47 central steel columns and evidence of it's use
was concealed by the shaped charge implosions of both towers and the
original plane crashes.

.

Quantcast