Re: Ether Steam Engine ???


44 inch cylnder 4 inch id.
top 150 psi air injected to fill the top inch 13 cubic inch or what
ever..and fuel and o2.


the bottom flap covers the end of the cylinder and opens into the tank.

The tank can be any sise ,,10 gal,,15 gal..

the water forced in will compress the air in the top of the tank,,,fire
cylinders till its pumped up.

The slide vane rotor with inner cam and spring loaded vanes to hold them
flush in the rotor is mounted anywhere you want.

You have a tank 3/4 full of water at 500 psi .

The cylinders maintain the tank presure and if your not using water it
dont nead to fire.

its its own break besides the breaks and the bottom director and move
cam wheel past center and use slowing down to push water into the tank
with the rotor to save the momentum as potentual energy saved in the
tank.

lpe is a fucking ausome engine.

Pmax gas/air/o2 is up to 2800 psi.
tank presure can be 2000 psi.
lpe is not a ssvr.
ssv and the lpe use the same rotor setup but lpe is not steam tite and
is near water tite vane blowby.


.

Quantcast