Xogen - clean water purficaction, free energy generator and home heating devices [2001]

http://groups.google.com/group/sci.physics/msg/43d450ae45b26187
On Jun 26 2002, 12:53 am, thhis...@xxxxxxx (Thhissux) wrote:

Super-Efficient Electrolysis.
Water can be broken into Hydrogen and Oxygen using electricity. Standard
chemistry books claim that this process requires more energy than can be
recovered when the gases are recombined. This is true only under the worst case
scenario. When water is hit with its own molecular resonant frequency, using a
system developed by Stan Meyers (USA) and again recently byXogenPower, Inc..,
it collapses into Hydrogen and Oxygen gas with very little electrical input.
Also, using different electrolytes (additives that make the water conduct
electricity better) changes the efficiency of the process dramatically. It is
also known that certain geometric structures and surface textures work better
than others do. The implication is that unlimited amounts of Hydrogen fuel can
be made to drive engines (like in your car) for the cost of water. Even more
amazing is the fact that a special metal alloy was patented by Freedman (USA)
in 1957 that spontaneously breaks water into Hydrogen and Oxygen with no
outside electrical input and without causing any chemical changes in the metal
itself. This means that this special metal alloy can make Hydrogen from water
for free, forever.


""Xogen's patented technology uniquely splits the water molecule into
a 2 to 1 mixture of hydrogen and oxygen gas with less electrical
current than is predicted by standard laws of electrolysis.

Although originally designed with energy production as the focus,
subsequent testing of the Xogen technology on wastewater samples from
a conventional sewage treatment plant identified potential
application as a wastewater treatment process. Under specific
operating conditions in a bench scale reactor, the technology has
achieved high levels of organic degradation and pathogen destruction
at very low retention times and temperatures.

The current stage of the technology development utilizes standard off-
the-shelf components and materials, has a small footprint, and is
powered by 24 V DC.""

http://www.xogen.ca
http://peswiki.com/index.php/Directory:Xogen_Technologies_Inc
http://nl.youtube.com/watch?v=pXo7CVFI5Sk





-----------------------
http://groups.google.com/group/sci.physics/msg/43d450ae45b26187
On Jun 26 2002, 12:53 am, thhis...@xxxxxxx (Thhissux) wrote:
This was taken fromhttp://www.savesite.net/gnvr/articles/121001_3.html
--------------------------------------------------------------
Monday, December 10, 2001

Countdown To Free Energy Speeds Up

Earth - In the late 1880's, trade journals in the electrical sciences were
predicting "free electricity" in the near future. Incredible discoveries about
the nature of electricity were becoming common place. Nikola Tesla was
demonstrating "wireless lighting" and other wonders associated with high
frequency currents. There was an excitement about the future like never before.
Within 20 years, there would be automobiles, airplanes, movies, recorded music,
telephones, radio, and practical cameras. The Victorian Age was giving way to
something totally new. For the first time in history, common people were
encouraged to envision a utopian future, filled with abundant modern
transportation and communication, as well as jobs, housing and food for
everyone. Disease would be conquered, and so would poverty. Life was getting
better, and this time, everyone was going to get "a piece of the pie." So, what
happened?

In the midst of this technological explosion, where did the energy
breakthroughs go? Was all of this excitement about "free electricity", which
happened just before the beginning of the last century, just wishful thinking
that "real science" eventually disproved?

The answer to that question is NO. In fact, the opposite is true. Spectacular
energy technologies were developed right along with the other breakthroughs.
Since that time, multiple methods for producing vast amounts of energy at
extremely low cost have been developed. Most of these technologies have not
made it to the "open" consumer market as an article of commerce, however. But
this is about to change

Many inventors have begun to publish their work, instead of patenting it and
keeping it secret. More and more, people are "giving away" information on these
technologies in books, videos and websites. While there is still a great deal
of useless information about free energy on the Internet, the availability of
good information is rising rapidly. Below is a short list of "free energy"
technologies that are proven beyond all reasonable doubt. The common feature
connecting all of these discoveries, is that they use a small amount of one
form of energy to control or release a large amount of a different kind of
energy. Many of them tap the underlying ether in some way; a source of energy
conveniently ignored by "modern" science.

Radiant Energy.
Nikola Tesla's Magnifying Transmitter, T. Henry Moray's Radiant Energy Device,
Edwin Gray's EMA Motor, and Paul Baumann's Testatika Machine all run on Radiant
Energy. This natural energy form can be gathered directly from the environment
(mistakenly called "static" electricity) or extracted from ordinary electricity
by the method called "fractionation." Radiant Energy can perform the same
wonders as ordinary electricity, at less than 1% of the cost. It does not
behave exactly like electricity, however, which has contributed to the
scientific community's misunderstanding of it. The Methernitha Community in
Switzerland currently has 5 or 6 working models of fueless, self-running
devices that tap this energy.

Permanent Magnets.
Dr. Robert Adams (NZ) has developed astounding designs of electric motors,
generators and heaters that run on permanent magnets. One such device draws 100
watts of electricity from the source, generates 100 watts to recharge the
source, and produces over 140 BTU's of heat in two minutes! Dr. Tom Bearden
(USA) has two working models of a permanent magnet powered electrical
transformer. It uses a 6-watt electrical input to control the path of a
magnetic field coming out of a permanent magnet. By channeling the magnetic
field, first to one output coil and then a second output coil, and by doing
this repeatedly and rapidly in a "Ping-Pong" fashion, the device can produce a
96-watt electrical output with no moving parts.
Bearden calls his device a Motionless Electromagnetic Generator, or MEG.
Jean-Louis Naudin has duplicated Bearden's device in France. The principles for
this type of device were first disclosed by Frank Richardson (USA) in 1978..
Troy Reed (USA) has working models of a special magnetized fan that heats up as
it spins. It takes exactly the same amount of energy to spin the fan whether it
is generating heat or not. Beyond these developments, multiple inventors have
identified working mechanisms that produce motor torque from permanent magnets
alone.

Mechanical Heaters.
There are two classes of machines that transform a small amount of mechanical
energy into a large amount of heat. The best of these purely mechanical designs
are the rotating cylinder systems designed by Frenette (USA) and Perkins (USA).
In these machines, one cylinder is rotated within another cylinder with about
an eighth of an inch of clearance between them. The space between the cylinders
is filled with a liquid such as water or oil, and it is this "working fluid"
that heats up as the inner cylinder spins. Another method uses magnets mounted
on a wheel to produce large eddy currents in a plate of aluminium, causing the
aluminium to heat up rapidly. These magnetic heaters have been demonstrated by
Muller (Canada), Adams (NZ) and Reed (USA). All of these systems can produce
ten times more heat than standard methods using the same energy input.

Super-Efficient Electrolysis.
Water can be broken into Hydrogen and Oxygen using electricity. Standard
chemistry books claim that this process requires more energy than can be
recovered when the gases are recombined. This is true only under the worst case
scenario. When water is hit with its own molecular resonant frequency, using a
system developed by Stan Meyers (USA) and again recently byXogenPower, Inc..,
it collapses into Hydrogen and Oxygen gas with very little electrical input.
Also, using different electrolytes (additives that make the water conduct
electricity better) changes the efficiency of the process dramatically. It is
also known that certain geometric structures and surface textures work better
than others do. The implication is that unlimited amounts of Hydrogen fuel can
be made to drive engines (like in your car) for the cost of water. Even more
amazing is the fact that a special metal alloy was patented by Freedman (USA)
in 1957 that spontaneously breaks water into Hydrogen and Oxygen with no
outside electrical input and without causing any chemical changes in the metal
itself. This means that this special metal alloy can make Hydrogen from water
for free, forever.

Implosion/Vortex.
All major industrial engines use the release of heat to cause expansion and
pressure to produce work, like in your car engine. Nature uses the opposite
process of cooling to cause suction and vacuum to produce work, like in a
tornado. Viktor Schauberger (Austria) was the first to build working models of
Implosion Engines in the 1930's and 1940's. Since that time, Callum Coats has
published extensively on Schauberger's work in his book Living Energies and
subsequently, a number of researchers have built working models of Implosion
Turbine Engines. These are fueless engines that produce mechanical work from
energy accessed from a vacuum. There are also much simpler designs that use
vortex motions to tap a combination of gravity and centrifugal force to produce
a continuous motion in fluids.

Cold Fusion.
In March 1989, two Chemists from Brigham Young University in Utah (USA)
announced that they had produced atomic fusion reactions in a simple tabletop
device. The claims were "debunked" within 6 months and the public lost
interest. Nevertheless, Cold Fusion is very real. Not only has excess heat
production been repeatedly documented, but also low energy atomic element
transmutation has been catalogued, involving dozens of different reactions!
This technology definitely can produce low cost energy and scores of other
important industrial processes.

Solar Assisted Heat Pumps.
The refrigerator in your kitchen is the only "free energy machine" you
currently own. It's an electrically operated heat pump. It uses one amount of
energy (electricity) to move three amounts of energy (heat). This gives it a
"co-efficient of performance" (COP) of about 3. Your refrigerator uses one
amount of electricity to pump three amounts of heat from the inside of the
refrigerator to the outside of the refrigerator. This is its typical use, but
it is the worst possible way to use the technology. Here's why. A heat pump
pumps heat from the "source" of heat to the "sink" or place that absorbs the
heat. The "source" of heat should obviously be HOT and the "sink" for heat
should obviously be COLD for this process to work the best. In your
refrigerator, it's exactly the opposite. The "source" of heat is inside the
box, which is COLD, and the "sink" for heat is the room temperature air of your
kitchen, which is warmer than the source. This is why the COP remains low for
your kitchen refrigerator. But this is not true for all heat pumps. COP's of 8
to 10 are easily attained with solar assisted heat pumps. In such a device, a
heat pump draws heat from a solar collector and dumps the heat into a large
underground absorber, which remains at 55° F, and mechanical energy is
extracted in the transfer. This process is equivalent to a steam engine that
extracts mechanical energy between the boiler and the condenser, except that it
uses a fluid that "boils" at a much lower temperature than water. One such
system that was tested in the 1970's produced 350 hp, measured on a
Dynamometer, in a specially designed engine from just 100-sq. ft. of solar
collector. (This is NOT the system promoted by Dennis Lee.) The amount of
energy it took to run the compressor (input) was less than 20 hp, so this
system produced more than 17 times more energy than it took to keep it going!
It could power a small neighborhood from the roof of a hot tub gazebo, using
exactly the same technology that keeps the food cold in your kitchen.
Currently, there is an industrial scale heat pump system just north of Kona,
Hawaii that generates electricity from temperature differences in ocean water.
(Condensed from an article by By Peter Lindemann, D.Sc. The full version is
available at:http://www.escribe.com/science/keelynet/m10192.html)

LIST OF RESOURCES:

Books:
* Living Energies by Callum Coats
* The Free Energy Secrets of Cold Electricity by Peter Lindemann, D.Sc.
* Applied Modern 20th Century Aether Science by Dr. Robert Adams
* Physics Without Einstein by Dr. Harold Aspden
* Secrets of Cold War Technology by Gerry Vassilatos

Websites:http://www2.murray.net.au/users/egel/content1.htm
developed by Geoff Egel in Australia. Best free-energy site on the net!http://www.free-energy.cc/
developed by Clear Tech, Inc. and Dr. Peter Lindemannhttp://jnaudin.free.fr/
developed by JLN Labs in Francehttp://www.1dove.com/fe/index.html
Jim's Free Energy Page in the USAhttp://www.keelynet.com/
developed by Jerry Decker in the USAhttp://www.xogen.com
site for super electrolysis technologyhttp://www.rumormillnews.com
excellent site for all kinds of alternative news, with many links
Patents: (most can be viewed athttp://www.delphion.com/) This list is nothing
more than a sample of inventions that produce free energy.
--------------------------------------------------------------

.

Relevant Pages