Re: Lunar Lander in a 5.2m faring?


"Alex Terrell" <alexterrell@xxxxxxxxx> wrote in message
news:1130102599.537472.211660@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
>
> As for high pressure feedlines, I assume they're only high pressure
> when the valve is turned on. And even if their valveless, joiming high
> pressure feed lines in space should be relatviely straight forward, as
> long as they align correctly.

And if they don't align correctly, a billion plus dollar mission has just
been wasted.


.

Relevant Pages

  • Re: Anyone familiar with early hydraulic steering systems?
    ... >pressure return hose from the reservoir and stick the end back into the ... >tester is a high pressure valve with a gage between the valve and the pump. ... In the linkage-type power steering gear the power cyl is not part of ...
    (rec.crafts.metalworking)
  • Re: Hot water boiler pressure high
    ... It has been running at a high pressure and this is causing the pressure relief valve to release water. ... It is an old system with no compressed air in the tank, which I believe does not have a bladder in the tank. ... The pressure relief valve does go off due to the high pressure, but does seem to seat well after the pressure goes down. ...
    (alt.home.repair)
  • Re: Damn... I may be turning into a DIR Nazi ;-)
    ... valve instead: its either straight in line, ... pressure gas that quickly is dangerous. ... s***t out of the high pressure seats in the regs. ...
    (rec.scuba)
  • Re: Easy one for you tech guys -
    ... you put the valve on the high pressure side or the return side. ... I'll connect a resistor to the cathode leg of the led. ... hot wire will go to the anode leg. ...
    (rec.games.pinball)
  • Re: HELP - AC problem - Honda 2000 CRV
    ... The high pressure valve became defective and leaked out ... I put in two cans, which should be more than enough. ... rises and triggers the high pressure sensor. ...
    (rec.autos.makers.honda)