Thrity Years From Now
- From: "American" <samuelransom@xxxxxxxxxxx>
- Date: 23 Jan 2007 11:59:47 -0800
Not true. Brown's gas was a scam, and the people who engaged in it
didn't understand what they were doing.
No, not yet FALSE. Those comments on the link to the forum are all
baseless rhetoric. Not a single one of those posts goes towards
disproving the cheaply remarkable adaptibility of H-H-O gas.
Not a one. In fact, it's really a bigger mystery now that more
people don't understand the nature of how Brown's gas could be
applied to the reduction of radioactivity in Americanum. Therefore,
as the demand for Brown's gas increases, so will the competition,
and so will the price of it come down.
Brown's gas is a scam sir. We've gone over this.
Can't be - The Egyptians used it (engravings depict electric lights
at Dendera, the Mayans used it (wet & dry wood = steam -> H-H-O) to
purify ore, and Zechariah Sitchin (The Lost Realms) makes the claim
that the statues of Tollan show some type of backpack with a pistol
like device inside a holster used to shape a stone. All these events
occurred over 2000 years ago, and there is evidence to suggest that
the ancient Egyptians knew about electroplating.
Rewriting H2O as HHO is just like rewriting 2x2x4 as 2x4x2 the
result has to be the same.
I don't doubt that you're pretty down pat with your math on num-
bers of atoms, but why obfuscate the H-H-O electrolysis process
with nonsensical semantics like this? H-H-O is the H2 'split'
into its single atomic state, H2O is the 'unsplit' state.
The equipment in the Fox News Report is an electrolytic process
that makes a combination of diatomic hydrogen from water, and
hydrogen-peroxide from water.
I'm not talking about just the "Denny Klein' process. He's probably
the closest thing to actually invalidating any other automotive
H-H-0 cracking processes that might come the way of the PTO.
A careful analysis of the heat balance of what is going on shows
that ALL the energy that appears in the system comes from the plug
in the wall its connected to, minus heat losses due to
system inefficiencies.
By 'careful analysis' aren't you, IMHO, suggesting that it was a
'carefully SPUN analysis' in order to discredit any similar tech-
nology that might go the way of the PTO (Patent and Trademark)
office? I think so. Good for you! I'd do the same thing if I
wanted to protect the effort to establish my invention in 'good'
standing. The PTO is, and always has been, an enemy of cold fusion,
since the Federal minions reflect the views and desires of each
other and must 'cover each other's back', because ridicule would
make the entire organization 'suspect' by the bureacracy-at-large.
Don't think so? Then observe here what they have done: The document
with letters S A W L (Sensitive Application Warning List) was cir-
culated among supervisors who are involved in the examination of
patents. The document stated that no document shall be issued on
"cold fusion" (paraphrasing) because it would result in embarassing
the PTO. A Freedom of Information Act filing (5 USC 522) request
was denied because the information "related solely to the personnel
rules and practices of an agency" and that the information could be
"... used to circumvent internal processes and procedures".
Clearly it is the Federal bureaucracy that holds back any kind
of revolutionary technology making it to the mainstream.
The Brown's gas doesn't work, any clear analysis of the energy
inputs and outputs show its an inefficient electrolysis system us-
ing an acidic rather than a basic water mix, which promotes the
production of hydrogen peroxide along with the hydrogen.
Yeah, 'any clear analysis' of *the Denny Klein Process* will in-
validate just about any "inside the box" effort to use the
*Denny Klein Process* with Brown's gas.
Brown's gas is not the issue, the *Denny Klein Process* IS.
However with all due respect, I think you're dumbing down the'plug
in the wall'. You see, Brown's gas is more revolutionary than that.
The 'plug in the wall' could be any number of energy creating tech-
nologies that offer a clean, unlimited source of energy. (e.g., the
nuclear betavoltaic battery, Perendev and Brady motors, homopolar
generators, spray-on solar cells) The creation of H-H-O is, as you
have said, a 'secondary energy source', but there is reason to be-
lieve that, the primary source too, has been extremely *cost sub-
limated*. If Brown's gas is 'secondary', then your's is certainly
'tertiary'. You want facts? Don't talk to the PTO, i.e., the 'es-
tablishment', because they are, and have always been, TRAITORS TO
MODERNIZATION. It's in their minutia, and they are in the business
of obfuscating, sublimating, and discrediting the drive to liberate
these technologies. Just as I have said earlier, the level of any
advanced civilization depends upon the establishment's ability
to help those who are less advanced come to the level where they
can be a contributing member of society, yet I believe that because
there are soooo many liberals in society and government today, some
*very* potential wheels of progress get lost and eliminated by the
legislating of minutia, rather than implementing new sources of
energy (in order to expand and privatize a free market economy).
They DUMB DOWN the awareness of revolutionary technology by cre-
ating STRONG DELUSION, and take the weak-minded along with them.
They are like ships without a compass, foaming at their own shame.
I am not part of their 'team'. Victims of the liberal PTO esta-
blishment are unwittingly drawn in Disneylike fashion to accomodate
what is seen as their PTO-glorifying lifestyle rather than one of
true modernization. I'd give them an overall 'D' for not currently
meeting or surpassing technological expectation. The best R&D must
now work in the black.
Nevertheless, the 'magnetic injector' I am designing consists of
LHe-4 superconducting circuit. The specifications for the axial
coil have already been calculated. There needs to be a correlation
between the laboratory version and the working model so that coil
life expectancy can be resolved. The specific impulse is 'several
minutes'. There are actually two coils involved - an exciter coil,
and axial field coil. Pellets are delivered to an induction tube
edge-to-edge, with the bulk of fuel spaced at one pellet diameter.
Since the operation of the tank collector is unable to keep up w/
the rate at which the feed lines are emptied, multiple feed lines
are grouped together behind a tacking plate, which consists of a
rotating metal plate with peripheral holes accessed in step, much
like a gatling gun. One hundred individual lines will require less
mechanical interruption than say, 150 lines. Each line would then
be 37.5 feet in length. Fifty lines @ 75 ft. per line is also pos-
sible. Each of the charging capacitors also have to be designed.
I've chosen Kezite K270 as the dielectric. There are a total of
600 - 360 coil charging units for the injector.
The length of a single charging unit is (360)(.01313m)=4.7268 m.
Grouping numbers of charging units into a single fuel cell would
require the length of the fuel cell to be a multiple of 4.7268 m.
I have chosen a five second fuel cell, so that # fuel cells =
600 second total impulse / 5 seconds per cell = 120 cells per
thruster. The aforementioned clean fissle (Li6D+BLi) for each in-
dividual pellet delivers the density radius product of the im-
ploded pellet raised beyond a few hundred, with a pellet density
greater than 100,000 times the liquid density. X-rays are trap-
ped with laser energy outputs of 10**4 joules, at 50% efficiency.
As the pellet becomes imploded tenfold in radius (1,000 times in
volume), the confinement time is also reduced tenfold, and the
burn time is reduced by a factor of 1,000. The burn efficiency
is therefore increased by a factor of 100 to 10%, yielding 30
times the laser input energy. About 50% of the initial fireball
explosion is converted into thrust. This means that the actual
working thrust amounts to about 15 times the laser input energy.
The pellets themselves are stratified with Boron 11, so that the
reactants are all non-radioactive.
The ignition lasers consist of phenolic resin foundations that
provide initial damping for the lense, mirror housings, pulse
power, and amplifiers, while the instrument racks provide damping
for the laser ignition pulse, preamp, optical switches, alignment,
frequency converter, controllers, triggers, and charging supplies.
High energy density, self-healing, metallized dielectric capaci-
tors are used in the pulse power system. RG-217 50 ohm high
voltage coaxial cables in 25 to 70 meter lengths are used to de-
liver the capacitor energy from the bank to junction blocks near
the flashlamp amplifiers.
Pulse power is supplied by the (5) 40KW reactors (reactor.gif)
and their Heat Shields, with the associated bus system to the
charging capacitors (a step down transformer supplies 480V/208V
RMS CW to the 0-22KV DC High Power Supply for a continuous 60
second charge to the energy storage capacitors). Coaxial cables
transfer the capacitor energy to the flash lamps. A schematic
representation of the laser ignition system capacitor bank power
supply is shown in laser.gif. 1% of the capacitor is charged
600msec prior to full charging the flash lamps.
(reactor.gif) available on request
(laser.gif) available on request
Equipment racks containing the controllers, triggers, and char-
ging supplies are mounted on the LARS (Laser Rack System). The
pulse shaper produces spatially and temporally shaped pulses
for the main laser. The shaper uses a narrow-band oscillator,
electro-optic modulators (temporal and bandwidth shaping) and a
preamplifier. The pulse generator utilizes diode-pumped oscil-
lators, integrated optical-waveguide modulators, and a high-gain
multipass preamplifier. The diode output is concentrated to
produce 11kw/cm**2 to pump the Ti:sapphire laser crystal (in
ring configuration) into spatial beam shaping prior
to amplification.
The reason for beam shaping is to compensate for spatial gain
variations in the main laser amplifier. The filters consist of
simple spatial neutral density type. The filters used are sim-
ilar to the ones used at LLNL's NIF project "using variable
speed computer controlled e-beam deposition of Cr on BK-7
glass substrate".
The beam shaping is a three step process: A birefringent beam
shaper and polarizer are used to flatten the beam. Next, a
parabolic transmission filter with serrated aperature is used
to square-shape the beam. Finally, a 5X magnifying spatial
filter is used to enlarge the square shaped beam.
Adaptive optics are required for focusing the beam to within
tolerances because of beam divergence. Irregularity in opti-
cal surfaces, diode pump beam steering, thermal effects in
the amplifier, and turbulence affect beam focus. This is in
addition to g-jitter. (transient, oscillatory accelerations).
A system incorporated into the space station uses the ARIS
(Active Rack Isolation System) for instrument racks which is
incorporated into the laser foundations using LARS (Laser
Rack System). The laser racks are calibrated for precise
alignment with the ignition lasers (96 in all).
Since turbulence induced in amps (because of thermal convec-
tion currents) can only be marginally corrected, convection
currents can be dealt with by choosing a different actuator
density, adding gas cooling sensors and/or increasing the
sensitivity of the system interface using *CDDI. The actu-
ators are bonded to the backside of each deformable mirror
within the **deformable mirror bank. The reason for using a
deformable mirror bank is to increase the response time for
controller wavefront analysis and preselection of the desired
wavefront for injection into the main laser. Remember, the
maximum repetition rate for each thruster is ~2400 shots/min
with a maximum 4 minute burn at 20% explosion fraction range.
The deformable mirror bank ring consists of "banks" of three
mirrors each, arranged to reflect the input beam in a series
of triangular paths. The input beam is assumed to be col-
limated, and each ring is scanned linearly by translating
each deformable mirror within each "bank". With one hundred
"rings" per laser, each set of timed "rings" would be ca-
pable of delivering the desired wavefront at 24 shots/min
for four minutes into the main laser.
* CDDI = Computerized Design Digital Interface, see:
cddi1.gif available on request
cddi2.gif available on request
cddi3.gif available on request
cddi4.gif available on request
cddi5.gif available on request
cddi6.gif available on request
** If only the input mirror for each ring is partially re-
flective, while the other two mirrors in each ring are total
reflectors, then there is only a reflected output beam for
each ring. To obtain a transmission type spectrum, at least
one of the other mirrors for each ring must be made partially
transmissive. While each ring must have at least three
mirrors (with one mirror a translating deformable type), the
calculated results are not changed by adding additional
totally reflecting mirrors with the same total optical
path length.
.
- Follow-Ups:
- Re: Thrity Years From Now
- From: Paul F. Dietz
- Re: Thrity Years From Now
- Prev by Date: Re: Solar Shell
- Next by Date: Mission: Impossible was a television adventures series Complete 7 season collection 171 episodes 41 DVDs
- Previous by thread: Re: Thrity Years From Now
- Next by thread: Re: Thrity Years From Now
- Index(es):
Relevant Pages
|
