Re: Olympus BH-2
- From: "GTO" <gregor_o@xxxxxxxxxxxxxxx>
- Date: Tue, 05 Apr 2005 22:10:32 GMT
Trust me, after spending 4 to 6k on a cooled CCD imaging device, spending
another 1k for a decent mount that is compatible is most likely not an
issue.
Check out http://www.diaginc.com/ and their adapaters. One of their imaging
devices is on my wishlist ;-)
Gregor
"Andrew" <andrewmoffat@xxxxxxxxx> wrote in message
news:1112703350.116654.151940@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
>I have on Olympus BH-2 microscope fitted with a 1.4 MegaPixel DVC
> digital camera. I use the microscope for materials analysis (mostly on
> metals and some polymers). I am thinking of upgrading my digital camera
> to a colour one but I am not sure of the best one to get so I am after
> some advice please.
>
> One of the most important things for the new camera would be that it
> has good quality square pixels so that I can measure the grains etc...
> accurately, I don't know if this is a problem with most newer cameras.
> The resolution is fine at 1.4 megapixels. I do use polarised light so I
> think that peltier cooled is better and I would preferably like not to
> have to pay for new adaptors so a standard C mount fit with a 2/3 inch
> ccd would be good.
>
> Any advice will be gratefully received. Thanks,
>
> Andrew
>
.
- References:
- Olympus BH-2
- From: Andrew
- Olympus BH-2
- Prev by Date: Re: Magnification factor of my digital camera
- Next by Date: Turbo Pump and Ion Pump Repairs.
- Previous by thread: Olympus BH-2
- Next by thread: FS: EG&G Photometric Microscope System
- Index(es):
Relevant Pages
|
