Re: variable phase contrast

But whether Zeiss (aus) Jena Phv will work for Zeiss West Ph is an
open question.

René.

On 5 Apr, 14:07, "Perl" <thl4...@xxxxxxxxx> wrote:
Hi !

I guess Zeiss Ph Condenser will work with Zeiss Ph Objectives

Regards
Pär


.

Relevant Pages

  • Re: How to setup Zeiss DIC?
    ... A Carl Zeiss standard microscope, several objectives (normal and phase ... - what other parts do I need to make the DIC condenser work ... leaving DIC prisms in place for BF and PC work. ...
    (sci.techniques.microscopy)
  • Re: Photomicography with 2.5x objective - uniform illumination?
    ... I am using a Zeiss standard 16 with inko condenser. ... NA condenser lens. ... objectives than either 3X or 5X. ...
    (sci.techniques.microscopy)
  • Re: Zeiss objectives - which oculars
    ... An alternative would be a find an older & 'cheap' Zeiss stand, and to find suitable 10x & 20X to complete the setup. ... I also don't think they are all Zeiss, but I'm not that familiar with Zeiss infinity corrected objectives. ... It will say something like 160/- on the side not visible in your photo, indicating it is designed for use in a 160mm tube length microscope. ... I was about to suggest you try the low-power objectives on a "wrong" scope and see, but on closer inspection I see that the infinity objectives have a wider mounting thread, so you can't. ...
    (sci.techniques.microscopy)
  • Re: Photomicography with 2.5x objective - uniform illumination?
    ... I am using a Zeiss standard 16 with inko condenser. ... NA condenser lens. ... The low power objectives ...
    (sci.techniques.microscopy)
  • Re: How to setup Zeiss DIC?
    ... A Carl Zeiss standard microscope, several objectives (normal and phase ... what other parts do I need to make the DIC condenser work ... Zeiss" on the top surface) then you need the Zeiss type III slider ...
    (sci.techniques.microscopy)