Re: Where Do You Get All The Little Bits And Pieces?

From: Too_Many_Tools <too_many_tools@xxxxxxxxx>
Date: Mon, 22 Oct 2007 22:12:41 -0700

On Oct 12, 1:24 am, Too_Many_Tools <too_many_to...@xxxxxxxxx> wrote:

As I work on microscopes, I find myself needing all those little bits
and pieces that wander off during a microscope's journey through life.

Things like end caps to cover optical ports, line cords, a cable or
two, a screw or nut, touch up paint, etc.

Any suggestions as to sources to limit the scavenger hunt that usually
results when one needs that "one little thing"?

Thanks

TMT

I have recently been rebuilding some power supplies...and of course
the line cord reliefs need replacing.

Any suggestions as to where to find cord reliefs, rubber feet and all
the other non metallic parts that are used on microscopes?

Thanks

TMT

.

Follow-Ups:
- Re: Where Do You Get All The Little Bits And Pieces?
  - From: Too_Many_Tools
- Re: Where Do You Get All The Little Bits And Pieces?
  - From: Richard J Kinch
- Re: Where Do You Get All The Little Bits And Pieces?
  - From: heini

References:
- Where Do You Get All The Little Bits And Pieces?
  - From: Too_Many_Tools

Prev by Date: Re: Repairing A Stuck Condensor Iris
Next by Date: Re: Where Do You Get All The Little Bits And Pieces?
Previous by thread: Re: Where Do You Get All The Little Bits And Pieces?
Next by thread: Re: Where Do You Get All The Little Bits And Pieces?
Index(es):
- Date
- Thread

Relevant Pages

Re: Internal wiring of USA v UK mains plug
... cord grip and also the internal fuse. ... This week I had to wire up a USA mains connector like this one ... wrap around screw terminals that can easily shed a loose wire ... Where Romex is allowed, you're right. ...
(sci.electronics.design)
Re: Spotting manufacturing defect in new stove. How to react?
... if you still want to do it with one cord, ... If the screw ... >>concerned about using an extension cord where non should be used! ... > appliance cord for the stove. ...
(alt.home.repair)