Re: Power supply for Leitz 250

On Dec 2, 7:47 pm, "Theo Griep" <gr...@xxxxxxxxx> wrote:
I just bought a Leitz 250 illumination unit without the power supply.
Does anyone know what voltage/current it needs, so I can make one myself?
The connector has 3 pins (1 is ground).

Theo

Theo, Minor problem, those lamps aren't made any more. If you want to
use what you have, well, good luck. I remember a friend telling me
about 12 years ago that those lamps aren't made or used any more.
They were real hot stuff in the '80's but now, not so good.

In general, try the Osram site first for any lamp data, I just tried
them and a some other people and no body had anything. You might want
to consider changing either the lamp system or going to a system like
X-cite. Common high powered lamp system for fluorescence are a dead
issue now, the X-cite is the future.

Thanks, let us know how it goes!

Kevin Cunningham
SMS
.