Re: Leica DMLB fine focus service query

On Apr 30, 1:10 pm, pennin...@xxxxxxxxxxx wrote:
Hi

Can anyone advise how the fine and perhaps coarse focus knob come off
the Leica DM LB and if so if within capability of a user to do.

There's a grub screw rattling around the inside of righthand fine
focus knob and can't figure out by inspection how to take knob off to
check. Doesn't affect focus but would like to get it back to how it
should be.

The holes in the coarse / fine plastic knobs seem to be access points
to Allen nuts on a central pillar rather than nuts in knobs
themselves.

Thanks for any help.

Ian

You will need a 1.3mm or 1.5 mm Allen wrench, which ever one works,
then loosen by 3 or so turns the screw. The screw sits on a flat spot
on the shaft so you have to get over that. Pull firmly and remove.

Let me know how it goes.

Thanks,

Kevin Cunningham
SMS
.

Relevant Pages

  • Leica DMLB fine focus service query
    ... Can anyone advise how the fine and perhaps coarse focus knob come off ... to Allen nuts on a central pillar rather than nuts in knobs ...
    (sci.techniques.microscopy)
  • Re: Leica DMLB fine focus service query
    ... focus knob and can't figure out by inspection how to take knob off to ... then loosen by 3 or so turns the screw. ... Kevin Cunningham ...
    (sci.techniques.microscopy)
  • Re: Repairing Renegade Juggling Knobs
    ... Beard Circus Specials has a really dodgy end knob. ... It's more likely that the screw is just stiff. ... - Make sure you're using the right screwdriver. ...
    (rec.juggling)
  • Re: Delphin clubs.
    ... Euro style wrapped handles ... This is a popular retrofit to onepiece clubs. ... about so much that Play switched to a better quality screw. ... you'll find that over time the knob will "roll round" ...
    (rec.juggling)
  • Re: Cutting down height of Al cased plastic knobs - neatly?
    ... Cutting tool sufficiently sharp ... but grip the knob in the jaws too tight and the Al of the knob ... it and not enough space between the jaws for the clip boss. ... grub screw to reduce the size. ...
    (sci.electronics.repair)